Home :: Products
 |
Latest products |
Swinging positioner
|
The positioner locates a workpiece during the machining. The swinging positioner who is described in this document locates the workpiece accurately from a hole. After the workpiece is positioned then it is lowered in its clamping state whilst the positioner swings with it.
|
Leveling jack
|
The jack is a part support (jacking up). After clamping the part it is prevented from being distorted or vibrated during the machining process. The leveling jack is functioning as an equalizer and not for jacking up the part.
|
Internal positioner
|
Positioners locate workpieces. The internal positioner described in this document locates the workpiece approximately from an internal recess. A centering vice jaw is further positioning the workpiece more accurately.
|
Crimping tool
|
The crimping tool is useful in manufacturing of steel idlers and rollers. Also with modifications can be use in many applications where crimping of thin round sheet metal components is needed.
|
Wedge Clamp
|
Wedge-operated clamps are used as an intermediate link in complicated clamping systems or as standalone fixtures. They are simple to manufacture, compact and easy to fit in a fixture. The simple wedge vice-clamp is described in this document, a very useful low-cost fixture for low precision clamping.
|
Clamping Links
|
The clamping link is a common general machinery component. It is designed in many forms and shapes and almost every automatic machine has at least one (depends on the number of mechanisms). Almost every movement made by four-bar links uses variations of this simple machinery component.
|
External equalizing clamp with lock
|
This hand-operated external equalizing clamp has a locking device. The fixture is capable to secure a 100mm width workpiece under heavy cutting pressure.
|
Oil seal removing tool
|
The oil seal removing tool is a hand-operated, one-size fixture for removing DIN3761-60x78x10 oil seals from housing bores.
|
Puller (bushing)
|
The bushing puller is a hand-operated, one-size fixture for removing copper alloy bushes from blind housing bores.
|
Metrology indexer (4-position)
|
The metrology indexer is a small size indexing fixture. It is indented primary for metrology (clamping small parts relative to metrology equipment) and secondary for assembly applications and it has four indexing positions.
|
